Buy Honda Outboard Parts

Announcement

Collapse
No announcement yet.

Honda GC 160 Valve Timing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Honda GC 160 Valve Timing

    I have Honda GC 160 engine on a power washer and the timing belt broke. I ordered the new parts but I'm not sure where the alignment marks are on the crank and the camshaft are located. The rod has what appears to be an arrow forged on it and there is a line in housing that would put the piston at TDC and cam pulley has two small lines in the 10 and 2 o'clock positions that do line up with the top edge of the head. Can any verify this is the correct markings.

  • #2
    Turn cranshaft until key way on crank is pointing up. Align the two alignment marks on cam pulley with mating surface of head.
    Regards
    Boats.net
    Honda Outboard Parts

    Comment


    • #3
      Thanks for the heads up, I'll try that

      Comment

      Working...
      X