Buy Honda Outboard Parts

Announcement

Collapse
No announcement yet.

Tilt manual bypass valve issue 50hp remote

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tilt manual bypass valve issue 50hp remote

    I have not figured out what the issue is with my tilt unit but I need to manually move the unit up and down. I turned the manual tilt bypass screw 1.5 turns and the engine went down fine. Now is the issue, I open the bypass screw 1.5 turns and the engine comes up 2-3 inchs. I checked the oil is moving and the piston is coming out of the cylinder. Just as the unit is passing by the transom bracket it stops. Put a chain fall on the unit thinking I was just a wimp and it does not move. I cant see that there is any secondary latch. What am I missing?
    Temple

  • #2
    That should have done it, try opening the screw about 2 or 3 turns.
    Regards
    Boats.net
    Honda Outboard Parts

    Comment


    • #3
      I will try opening the bypass more, that wont work can I un bolt the bottom of the tilt unit from the transom bracket to get the thing to go up so I can trailer the boat and engine?
      Thanks

      Comment


      • #4
        Tilt unit bottom bolt on Honda 50 power tilt

        I will try opening the bypass more, that wont work can I un-bolt the bottom of the tilt unit from the transom bracket to get the thing to go up so I can trailer the boat and engine?
        Thanks

        Comment

        Working...
        X