Buy Honda Outboard Parts

Announcement

Collapse
No announcement yet.

Trim/tilt switch in side mount control

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Trim/tilt switch in side mount control

    I want to install a trim switch in my control box. It currently does not have one installed. Does trim switch #35370-ZV5-823 fit all side mount boxes? The listing shows models from the 1997 till 2011 for smaller and mid-range motors. If anyone has installed one in a non-switch box did you need any additional parts?

  • #2
    Never tried but probably would be able to add it, probably have to change top cover as well.
    Regards
    Boats.net
    Honda Outboard Parts

    Comment


    • #3
      OK I got the switch and it fits into the end of the control/shift lever. The little plastic cap is the same size and popped right out. Both the switch and the dummy cap are the same size and same plastic clips to hold it in place. Does anyone know what or how much of the control box has to be disassembled to snake the wires through the box.

      Comment


      • #4
        Top mount box will need to remove cover and run wires down underneath handle.
        Side mount box will have to remove side and run wires inside box.
        Regards
        Boats.net
        Honda Outboard Parts

        Comment

        Working...
        X