Buy Honda Outboard Parts

Announcement

Collapse
No announcement yet.

BF30 issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Georgiafisherman65
    replied
    Thanks again for all your help.

    Leave a comment:


  • boats.net
    replied
    Thread the cable ends(control box end) on to the shift and throttle cable no more than 8mm and install cables in control box.
    Screw shift pivot ends on cables on engine end and install throttle cable to throttle arm on engine(number 5 in this diagram, https://www.boats.net/catalog/honda/...97/shift-shaft) and connect shift cable to shift arm (inside number 10 square on parts diagram).

    Leave a comment:


  • Georgiafisherman65
    replied
    I believe I understand how the cables connect to the remote control, where the mystery is how they attach to the motor with what parts. I have reviewed, and studied the diagram for my BAWL1003244 looking a the shift shaft and still donít fully understand the cable attachment. I would like to attach a picture, but it says I am not authorized.Thank you as always for any help.

    Leave a comment:


  • boats.net
    replied
    Don't know your exact model but look in parts catalog for parts needed, number 3 and number 20 in this parts page are the cable ends, https://www.boats.net/catalog/honda/...ele-cap-gray-2
    Look up same page for your model number and your style control box.

    Leave a comment:


  • Georgiafisherman65
    replied
    Still have a issue with how, and what parts needed to connect the two cables to the motor, and the remote. I believe that I don't have anything to do this with from the research I have done thus far. Thanks for the help.

    Leave a comment:


  • Georgiafisherman65
    replied
    Thank you for the information. That makes sense.

    Leave a comment:


  • boats.net
    replied
    It does need shift and throttle cables to connect control box to engine, will need two part number 249xx-ZY3-7100(replace xx with length of cable needed) control cables installed to make it shift and throttle from control box.

    Leave a comment:


  • Georgiafisherman65
    started a topic BF30 issue

    BF30 issue

    I purchased a used Honda BF30 with the remote, when I got it home and placed a washout adapter on it with a water hose,the transmission will not go into gear, forward or reverse! Does the motor have to be submerged into water before the transmission will work? I noticed there is not a shift cable ,only wiring from the remote control to the engine?
Working...
X