Buy Honda Outboard Parts

Announcement

Collapse
No announcement yet.

BF50A Have a few questions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • BF50A Have a few questions

    BAZL-2000238 trying to figure out what year the motor is?

    The motor sat up for a year so i took apart the carbs and cleaned them, replaced all of the gaskets and cleaned all passages. After i put it all back together it started right up but now it idles high around 1400 RPM and if I punch the throttle from idle the motor will stall out and die. I am looking for any suggestions on what to check.

  • #2
    It's a 1998 model number BF50AW.
    Probably need to carbs synchronize with carb sync meters.
    Regards
    Boats.net
    Honda Outboard Parts

    Comment


    • #3
      Carb Sync

      I have a buddy that has the carb sync tool and synced them using it last week, but it still ran rough and idled too high. Its very possible we could have done it wrong but he said he knew how to do it. Do you have any instructions for doing this?

      Comment


      • #4
        Could be air leak on intake like bad gaskets,carb linkage installed wrong or dashpot adjustment, need to check for leaks and adujust linkage and sync like outlined in service manual.
        Regards
        Boats.net
        Honda Outboard Parts

        Comment

        Working...
        X