Trolling Control switch

cliveaust · #1 (**permalink**) 02-07-2012, 01:50 AM

I am trying to install a trolling control switch on BF60A honda outboard. Have located green/black wire, & black wire. I cannot find where to plug the brown wire in. There is an existing brown wire running from control box to engine, but there are no additional connection points & I am hesitant to connect to this as it may be wrong wire. Any help will be most appreciated. Thanks Clive

boats.net · #2 (**permalink**) 02-07-2012, 09:20 AM

What is the part number of the switch you have?

cliveaust · #3 (**permalink**) 02-07-2012, 02:56 PM

The part number is Honda 35345-ZZ3-741. Thanks for your help. Clive

boats.net · #4 (**permalink**) 02-08-2012, 09:42 AM

Here is some information on that switch,
35345-ZZ3-741ControlSwitch.pdf

cliveaust · #5 (**permalink**) 02-08-2012, 03:54 PM

Hi, thankyou so much your assistance is greatly appreciate. All wired up & working now. I will sorce any future parts direct from you in future. Thanks Clive

maabrhan · #6 (**permalink**) 04-15-2012, 04:42 AM

Hi I would like to connect Trolling Control Switch to my brand new BF-115D, but I have recognized that it is bit different. I have 06323-ZZ5-781 Control Panel.
Do I need an additional cable (32186-ZZ3-000)? Or would it be possible to connect it without additional cable?
Could anyone provide me wiring diagram of cable 32186-ZZ3-00 or Side Mount Remote Control 24800-ZZ5-781 (24800-ZZ5-030) which should be part of installation manual?
Thank you for help,
Martin

boats.net · #7 (**permalink**) 04-16-2012, 09:46 AM

06323-ZZ5-781 comes up as invalid part number, but a BF115D should use
35345-ZZ3-741 Control Switch and
32197-ZZ3-060AH Switch adapter harness

maabrhan · #8 (**permalink**) 04-17-2012, 07:57 AM

06323-ZZ5-671
Should be the one I have.

boats.net · #9 (**permalink**) 04-17-2012, 09:57 AM

That is the ignition switch panel, still would need trolling control switch.