I have a 90bf honda outboard 97, I am trying to get at the water pump. I removed the 5 bolts from the lower unit but I cant drop it down? What am I missing.
Thanks,
Rafa

Hollywood is notorious for its short-lived and highly-publicized hookups and breakups. Especially when it comes to divorce, nothing's more brutal than an all-out Tinseltown brawl. Take a look at some of the dirtiest drag 'em out divorce battles EVER ...

Kelsey Grammer and Camille Donatacci

While fans of 'Real Housewives of Beverly Hills' watch the slow demise of Camille Donatacci's marriage to Kelsey Grammer months after it happened in real life, more dirty deets of the split just keep on coming ... thanks to Camille's big mouth.

After Kelsey had an affair with now-fiance Kayte Walsh while performing in the Broadway show 'La Cage Aux Folles,' Camille took to the press to spill the beans on their defunct marriage. First Camille said that Walsh's miscarriage was karma, then she implied that Kelsey dabbles in cross-dressing ... oh and there's that sticky little issue of how to divide up the former 'Frasier' star's 100 million dollar fortune.

It should drop down, try tapping with rubber mallet to get to drop. If drive shaft splines are corroded then it will be extremly difficult to get apart.

__________________
Regards
Boats.net
Honda Outboard Parts

Компания "Авто-Прокат Плюс" предлагает машины в прокат в Одессе. В нашем парке автомобилей представленны автомобили различных классов. От эконом до бизнесс-класса. Цены на аренду ниже чем в любом другом прокат города и опыт работы уже более 3х лет, позволяет сказать, что мы предусмотрели все пожелания наших клиентов.
Время оформления документов не более 15-20 минут. Вы гость нашего города? Мы подадим вам машинук вокзалу, аэропорту.
Наши контакты: (+38)0988777333; (+38)0638555333; (+38)0487952895
Аренда авто в Одессе

Цены на аренду автомобилей в Одессе

Rafita also make sure gear shifter is disconnected. As previously states careful persuasion with a rubber mallet of other soft hammer may be needed especially if lower unit is seldom or has never been removed. It may even be necessary to use some thing as a wedge to pry the lower unit/ shaft housing joint open. Soak things with a penetrating oil or Mouse Milk Then using a mallet to apply a "calibrated inertial adjustment" to a heavy knife machete or cleaver should force the joint apart. Something like a large screw driver is much to thick to go into the joint slot. My lower unit had never been dropped in 6 years, and I.
used a mallet and a meat cleaver. Just be a bit gentle. Good luck