Honda BF 130 stall

#1 (**permalink**) 09-08-2009, 05:31 PM

My BF130 run well for years but now , when I accelerrate very fast it hesitate specially when the trim is full down.
When the boat hit a wave it stall for half a second.
I feel like when it need more power fast(like hitting a wave) it stall a second.
I´d check all injectors, change fuel high pressure pump, pressure regulator, and now I ordered a MAP sensor(I´m still waiting for it).
The computer give me no codes.
The TPS and the MAP are giving me the right voltage with the engine off..
The spark plugs are realy full of carbon and I read about problems with the MAP or manifold temp. sensors could give me that syntoms.
Am I in the right way??

boats.net · #2 (**permalink**) 09-08-2009, 10:05 PM

Stalling when hitting a wave could be a bad main relay.

JUST-IN-TIME · #3 (**permalink**) 09-09-2009, 01:28 AM

Quote:

Originally Posted by boats.net

Stalling when hitting a wave could be a bad main relay.

yep they had recalls for it

#4 (**permalink**) 09-09-2009, 03:13 AM

My first trial was the main relay. I released the relay screws and hold it with hand avoiding any shock. but the problem still there. I´ll try again.
About the recall... it´s the only Honda 130 in Brazil. We don´t have any service for this model.

JUST-IN-TIME · #5 (**permalink**) 09-10-2009, 01:36 AM

Quote:

Originally Posted by edsouto

My first trial was the main relay. I released the relay screws and hold it with hand avoiding any shock. but the problem still there. I´ll try again.
About the recall... it´s the only Honda 130 in Brazil. We don´t have any service for this model.

man that sucks!!!

ask boats.net to run the serial number for you

#6 (**permalink**) 10-07-2010, 08:37 PM

Stop hack the program!!!