BF135 Wouldn't Idle after changing High Pressure Filter Element

scallawah · #1 (**permalink**) 04-30-2011, 06:32 PM

Had Bad fuel recently in one engine. I replaced high pressure filter screen which was squashed up and discolored. Engine starts up and stalls after 5-10 seconds say. Throughly cleaned the vst tank and re=installed it but same symptoms persist. I repalced the complete vst tank from the starboard engine but the engine does the same thing.

I'll appreciate any possible assistance

regards
scall

boats.net · #2 (**permalink**) 05-07-2011, 01:16 PM

May have plugged injectors and need to have injectors cleaned.

scallawah · #3 (**permalink**) 05-08-2011, 09:50 PM

did check injectors....was ok,but someone had mess with the idle screw on the theottle body..... any assistance how to get it back to normal idle

boats.net · #4 (**permalink**) 05-12-2011, 02:22 PM

Need to have it connected to diagnostic computer system before making any adjustments to idle speed.

scallawah · #5 (**permalink**) 05-14-2011, 07:06 PM

thanks a lot , but i'm all the way in the caribbean/Grenada and the honda dealer only have tools for automobiles. Any other assistance how to reset the idle screw

boats.net · #6 (**permalink**) 05-17-2011, 09:55 AM

All you can do is try adjusting, not sure if would be successful.

scallawah · #7 (**permalink**) 05-21-2011, 09:54 AM

Any idea on how much turns to lock the idle screw so i can do a reset.