Buy Honda Outboard Parts

Announcement

Collapse
No announcement yet.

starting problem

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • starting problem

    I have a 05 glacier bay canyon runner with 2005 150 Hondas . The port motor started hesitating to turn over then the starter wouldn't engage at all. I can turn the
    key on and manually cross over the solenoid and start the motor. I switched the wiring on the switches and the port switch will start the starboard motor but the starboard switch wont
    start the port motor telling me that the port switch is fine. I replaced the neutral switch and checked the continuity when in neutral and works fine but still no starter engagement with key

  • #2
    If you can jump across solenoid(by pass solenoid) and starter will crank over then solenoid is bad.
    Regards
    Boats.net
    Honda Outboard Parts

    Comment


    • #3
      I am not getting voltage to my solenoid wire when switch is on . I am jumping from battery lug to solenoid to activate start

      Comment


      • #4
        can anybody help

        Comment


        • #5
          Check fuses and main relay, check main harness between key switch and engine.
          Regards
          Boats.net
          Honda Outboard Parts

          Comment


          • #6
            where is main relay

            Comment


            • #7
              They are in fuse box.
              Regards
              Boats.net
              Honda Outboard Parts

              Comment

              Working...
              X