Buy Honda Outboard Parts

Announcement

Collapse
No announcement yet.

Question about value resistance of injectors

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Question about value resistance of injectors

    Hi, I have a Honda 115 AX outboard (year 1999). Checking the injectors gives me a resistance of 13.9 ohms (all). According to the manufacturer, the value is between 11.1 and 12.3. The engine starts well, but the idle is not stable.
    Failure of the four injectors?

    Thank you.

  • #2
    A little high resistance reading in high summer temps are normal. If one injector was clogged or a bad injector might cause a poor idle but if all 4 went out engine wouldn't run. Might have injectors cleaned and tested or might have the air control valve(idle control) tested to see if working properly.
    Regards
    Boats.net
    Honda Outboard Parts

    Comment


    • #3
      Thank you very much !!!!!!

      Comment

      Working...
      X